Zaenkrat smo trije
Moram še preverit kako je zadno stanje kategorija factory in open , tole zgleda to.
4.2. RIMFIRE DIVISIONS
4.2.1. OPEN DIVISIONS
The aim of the Open Division is to utilize every possible equipment advantage in order to win. There are no
additional equipment rules in Open Division, and subsequently this division drives innovation in Precision
Rifle sport rifles and in auxiliary gear and accessories.
4.2.1.1. OPEN DIVISION
4.2.1.1.1. This Division is Open to all competitors regardless of gender or age.
4.2.1.2. LADIES OPEN DIVISION
4.2.1.2.1. All female shooters are eligible to shoot in the Ladies Open Division.
4.2.1.3. JUNIOR OPEN DIVISION
4.2.1.3.1. Anyone 12 years old and over, and 18 years old and under at the start of the
calendar year is eligible to shoot in the Junior Open Division.
4.2.1.4. SENIOR OPEN DIVISION
4.2.1.4.1. Anyone over the age of 55 is eligible to shoot in the Senior Open Division.
4.2.2. FACTORY DIVISION
The Factory Division was designed for mainstream rifle manufacturers, and pits manufacturers' products
against each other on a level playing field.
Athletes are required to compete with the rifle as it comes from the factory, with little to no modification to
the rifle system.
4.2.3. A Factory Division Rifle is a non-custom, standard stock rifle, manufactured/assembled
by a single mainstream manufacturer, in a configuration as available by that
manufacturer at the time of production.
4.2.3.1. The action, chassis/stock and trigger must be manufactured by, or be proprietary to
that manufacturer, or be a generic part.
4.2.4. Magazine may not contain more than 10 rounds at the start signal of a stage.
4.2.5. A bipod may be attached to the rifle.
4.2.6. A tripod may be attached to the rifle only after the COF start signal.
4.2.7. Allowed modifications:
4.2.7.1. The barrel may be replaced, as long as the replacement barrel is the same
profile, caliber and length as available in that model from the manufacturer.
4.2.7.2. The barrel may be re-crowned and / or threaded.
4.2.7.3. The action may be bedded to the chassis or stock; however, the chassis or stock may
not be altered for better fit.
4.2.8. A suppressor, muzzle brake or barrel tuner may be fitted.
16 / 25
IPRF Precision Rifle Rules Updated: 14 April 2023 – Version 1.1
4.2.9. Minor detailing is permitted, including:
4.2.9.1. Removal of factory burrs,
4.2.9.2. Polishing,
4.2.9.3. Painting,
4.2.9.4. Adding of grip or protective tape.
4.2.10. Prohibited Modifications:
4.2.10.1. No permanent alterations may be made to the rifle.
4.2.10.2. No additional parts may be added to, or swapped on, the rifle.
4.2.10.3. No further gunsmith modifications or truing are permitted.
4.2.11. Should any parts or components break, then they must be replaced by the same factory
parts or components.
4.3. OPTICS
There are no restrictions on optics in any IPRF divisions.
(19-05-2023, 09:36)jps Napisal: Zame in ostale neznalce glede te discipline - a lahko kdo opiše disciplino prosim.
Hvala, JPS
Tako nekako zgledajo tekme